Characteristics Of Planetary Reducer

Jun 12, 2025 Leave a message

1. High torque and impact resistance
The structure of planetary gears is different from that of traditional parallel gears. Traditional gears rely on the extrusion drive of the very few contact surfaces between the two gears, and all the load is concentrated on the few gear surfaces that are in contact, which is easy to cause friction and fracture of the gears. The planetary reducer has a larger area of 360-degree load on the gear contact surface, and the multiple gear surfaces together bear the instantaneous impact load evenly, so that it can withstand the impact of higher torque, and the body and bearing parts will not be damaged or broken due to high load.

2. Small size and light weight
The traditional gear reducer step is degraded by multiple sets of large and small gears to staggered transmission and deceleration, because the reduction ratio must be produced by the multiple ratio of the two gears, and there must be a certain distance between the large and small gears, so the gearbox has a large capacity. Especially when the combination of high reduction ratio 3 requires more than two reduction gearbox connection combinations, the structural strength is relatively weak and the length of the gearbox is lengthened, resulting in volume and weight and its size. The structure of the planetary reducer can be repeatedly connected by the number of segments, and the combination of multiple segments can be completed separately, which is small in size, light in weight and light in shape, which makes the equipment more valuable.

3. High efficiency and low backlash
Because each set of gear reducer only has a single tooth surface occlusal contact when decelerating and transmitting, when the same torque is transmitted, a larger tooth surface stress is required, so the gear design must adopt a larger modulus and thickness, the larger the gear modulus, the greater the deflection tolerance value between the teeth, and the cumulative backlash between the reduction ratios of each section of the gear clearance is relatively high. The unique multi-point uniform density in the planetary gear combination, the arc envelope structure of the external gear ring makes the external gear ring and the planetary gear closely combined, and the tightness between the gears is high, in addition to improving the extremely high efficiency value of the reducer, the equipment itself can also achieve high positioning selection.