Product Overview
Long-Length Ground Gear Racks are precision linear motion components engineered for heavy-duty, long-travel axis drives that require high positioning accuracy and load capacity, utilizing multi-axis CNC processing to maintain tight cumulative pitch tolerances over extended travel distances.
Key Features
High Pitch Accuracy
Precision ground to DIN 5 to DIN 8 grades, minimizing cumulative pitch error across long travel axes.
Seamless Splicing
Ground end faces and matched tooth profiles allow continuous multi-piece mounting without pitch interruption.
High Load Capacity
Optimized tooth geometry and high-strength alloy steel withstand substantial dynamic and shock loads.
Low Noise Operation
Fine surface finish (Ra ≤ 0.4 um) reduces friction, heat generation, and vibration during travel.
Technical Specifications
|
Parameter |
Specification Details |
|
Module Range |
Module 1.0 to Module 30 |
|
Accuracy Grades |
DIN 5, DIN 6, DIN 7, DIN 8 (AGMA Q9 to Q12) |
|
Standard Lengths |
1000 mm, 1500 mm, 2000 mm, 3000 mm |
|
Pressure Angle |
20 degrees standard (Custom angles available) |
|
Cross-Section |
Square and rectangular profiles with reference edges |
Design & Tooth Geometry
Tooth Configurations: Spur racks offer zero axial thrust; helical racks provide higher contact ratios and increased load capacity.
Profile Modification: Modified tooth flanks compensate for deflection under load, ensuring even stress distribution.
Mounting Integration: Pre-drilled mounting holes, threaded blind holes, or dowel pin holes configured to client drawings.
Materials & Heat Treatment
Alloy Selection
C45 carbon steel, 40Cr, 42CrMo4, and 16MnCr5 case-hardening steel.
Induction Hardening
Selective tooth flank hardening achieving HRC 50 to 60 with 1.5 mm to 3.0 mm case depth.
Case Carburizing
Deep carburizing processes for high-load applications requiring superior fatigue resistance.
Manufacturing Capabilities
CNC Form Grinding
Multi-axis continuous form grinding machines utilize CBN wheels to finish tooth flanks post-heat treatment.
Reference Machining
Four sides ground or milled relative to the pitch line for accurate parallel installation.
Length Management
Advanced indexing systems maintain pitchline integrity across extended continuous setups.
Quality Inspection
Pitch Verification
Laser interferometers check single pitch error and total cumulative pitch error.
Metallurgical Analysis
Spectrometers verify chemical composition; microscopes measure case depth and microstructures.
Geometric Inspection
CMM machines inspect overall length, straightness deviation, parallelism, and hole positions.
Sizes & Customization
|
Customization Aspect |
Available Options |
|
Face Width |
20 mm to 150 mm |
|
Height |
20 mm to 160 mm |
|
Max Single Length |
Up to 3000 mm without splicing |
|
Surface Coatings |
Black oxide, electroless nickel, or chrome plating |
Applications
CNC Gantry Machines
Long-travel X-axis and Y-axis drives on large plasma cutting tables, laser cutters, and milling routers.
Heavy Automation
Automated storage and retrieval systems, heavy gantry robots, and transfer lines.
Railway Systems
Industrial material transport cars and lifting mechanisms requiring positive linear traction.
Packaging & Logistics
Anti-Corrosion
Coated with heavy-duty rust preventative oil and sealed in moisture-barrier VCI plastic.
Wooden Crating
Secured inside reinforced wooden boxes with internal bracing to prevent bending or shifting.
Documentation
Shipments include material test reports, dimensional inspection sheets, and handling instructions.
Frequently Asked Questions
Q: How is cumulative pitch error controlled over long spans?
A: CNC rack grinders with integrated laser compensation systems keep cumulative pitch error within strict per-meter tolerances.
Q: How are multiple rack sections aligned during installation?
A: Racks feature ground end faces and are supplied with matching gauge blocks or pin holes for smooth joint engagement.
Q: What is the standard lead time for custom length orders?
A: Standard production requires 3 to 5 weeks depending on material availability and heat treatment specifications.
Q: Can racks be supplied without surface hardening?
A: Yes, unhardened normalized or pre-toughened materials are available for secondary client post-machining.
Hot Tags: long-length ground gear rack, China long-length ground gear rack manufacturers, suppliers, factory, Custom DIN 6 Ground Gear Racks, Custom Straight Tooth Gear Racks, DIN 6 Ground Gear Racks for Robotic Travel Axes, Round Gear Racks for Material Handling Equipment


