Product Overview
Helical ground gear racks provide smooth, high-load linear motion for machine tools and automation systems through optimized tooth geometry and precision flank grinding.
Key Features & Benefits
High Load Capacity: Multiple teeth mesh simultaneously to distribute heavy loads evenly and reduce operational vibration.
Low Pitch Deviation: Post-heat-treatment precision grinding controls cumulative error over long travel distances.
Enhanced Wear Resistance: Induction-hardened tooth flanks maintain dimensional stability under continuous high-speed cycling.
Technical Specifications
|
Parameter |
Standard Specification |
Custom Options |
|
Module Range |
Module 1.0 to 25 |
Non-standard pitches |
|
Precision Grade |
DIN 6, DIN 7, DIN 8 |
Higher tolerance classes |
|
Helix Angle |
19° 52' 30'' (Left / Right) |
Specific angle requirements |
|
Pressure Angle |
20° standard profile |
Modified pressure angles |
|
Standard Lengths |
1000 mm, 2000 mm, 3000 mm |
Cut-to-length dimensions |
Product Design & Tooth Geometry
Helix Angle Optimization: The 19.53° helix angle increases contact ratio, minimizing impact shock during high-speed directional reversals.
Profile Modification: Optimized tip and root relief prevent edge loading and lower noise generation under heavy loads.
Reference Surfaces: Machined bottom and back reference edges allow direct alignment to machine beds without complex shimming.
Material & Heat Treatment
|
Alloy Steels |
42CrMo4 and C45 selected for high tensile strength and fatigue resistance. |
|
Induction Hardening |
Tooth flanks hardened to HRC 58 - 62 with a case depth of 1.5 mm to 3.0 mm, preserving core toughness. |
|
Through-Hardened Options |
Available for specialized heavy applications requiring uniform hardness. |
Manufacturing & Grinding Capabilities
Continuous Generating Grinding: Multi-pass CNC grinding ensures uniform tooth profiles and accurate flank geometry.
Thermal Stress Relieving: Controlled annealing processes eliminate residual stresses induced by rough machining.
End-Face Machining & Tooth Matching: CNC end-milling and specialized tooth-matching operations ensure seamless multi-segment installation with correct pitch continuity across joints.
Quality Inspection
Gear Metrology
Automated CNC gear measuring centers inspect pitch, profile, and helix deviations.
Hardness Testing
Rockwell and Vickers testers verify case depth and surface hardness across every batch.
Traceability
Each finished bar is laser-marked with a unique batch number linked to material and inspection reports.
Sizes & Customization
Cross-Sections
Square and rectangular profiles in standard metric dimensions.
End Configurations
Ground end-faces with step joints or matching hole patterns for infinite extension.
Surface Finishes
Black oxide treatment, chemical nickel plating, or corrosion-resistant coatings.
Applications
CNC Machine Tools: Gantry milling machines, laser cutting systems, and large-format plasma cutters.
Linear Motion Systems: Heavy-duty rack-and-pinion drives for automated guided vehicles and gantry robots.
Material Handling: Automated storage and retrieval systems and high-speed transfer units.
Packaging & Logistics
Corrosion Protection: Coated with heavy-duty rust-preventive oil and sealed in VCI films.
Rigid Wooden Crates: Secured inside reinforced wooden boxes with internal bracing to prevent transit damage.
Logistics Handling: Standardized packaging designed for secure global ocean and air freight.
Frequently Asked Questions
Q: How do helical racks compare to spur racks in noise?
A: Helical racks engage gradually across the tooth width, reducing impact shock and operating noise compared to spur teeth.
Q: Can these racks be joined for long strokes?
A: Yes. Precision-ground end faces, matched tooth joints, and alignment gauges allow continuous joining while maintaining exact pitch spacing.
Q: What lubricant is recommended for high-speed operation?
A: Synthetic gear oils or high-viscosity lithium greases with extreme pressure additives are recommended to prevent boundary wear.
Q: Are custom module sizes and lengths available?
A: Custom modules, non-standard lengths, and specific hole patterns can be produced from provided technical drawings.
Hot Tags: helical ground gear rack, China helical ground gear rack manufacturers, suppliers, factory, Custom DIN 6 Ground Gear Racks, Custom Straight Tooth Gear Racks, DIN 6 Ground Gear Racks for Robotic Travel Axes, Round Gear Racks for Material Handling Equipment


