Product Overview
High-Precision Ground Gear Racks are precision linear motion components engineered for heavy-load CNC machinery and synchronized multi-axis automated drives. Manufactured through continuous tooth-grinding processes after carburizing and quenching, these racks deliver smooth, backlash-optimized meshing, exceptional positional accuracy, and high load-carrying capacity under continuous operational cycles.
Key Features & Benefits
Positional Accuracy: Cumulative pitch deviation minimized across long rail setups to ensure multi-meter synchronization without progressive error accumulation.
Tooth Profile Optimization: Profile and helix corrections counteract deflection under heavy dynamic loads, ensuring uniform contact patterns and lower operating noise.
Surface Durability: Deep carburized case hardening provides high wear resistance on tooth flanks while maintaining a resilient, shock-absorbing core.
Modular Joint Capability: Precision-machined end-faces and mounting holes enable seamless multi-segment linking for extended travel lengths without pitch disruption.
Technical Specifications
|
Parameter |
Specification Range |
|
Module Range |
Module 1.0 to Module 30.0 (DP / CP equivalents available) |
|
Accuracy Grades |
DIN 5 to DIN 10 (ISO Grade 5 to 10 / AGMA equivalent) |
|
Standard Lengths |
1000 mm, 2000 mm, and 3000 mm configurations |
|
Tooth Configurations |
Straight teeth and Helical teeth (up to 19 degrees helix angle) |
|
Mounting Options |
Through-hole, tapped-hole, or custom foot configurations |
Tooth Geometry & Design
Helix Selection
- Spur Racks: Ideal for reversing applications, simple alignment, and zero axial thrust forces.
- Helical Racks: Deliver higher contact ratios, smoother engagement, reduced vibration, and increased load capacity at high speeds.
Pressure Angle
Standard 20-degree pressure angle optimized for balanced tooth strength and low sliding friction. Custom 14.5-degree or 25-degree geometries available.
Tooth Modifications
Profile relief and lead crowning compensate for thermal expansion and structural deformation under heavy operating loads.
Material & Heat Treatment
Alloy Steel Selection
- C45 / 1045: Applied for induction hardening where core strength and moderate load capacity are prioritized.
- 16MnCr5 / 20MnCr5 / 8620: Case-hardening alloy steels providing optimal balance between tough core resilience and hard wear surfaces.
- Stainless Steel: Austenitic or martensitic grades applied for corrosion-resistant environments.
Heat Treatment Protocols
- Carburizing & Quenching: Case depths range from 0.8 mm to 2.0 mm depending on module size.
- Surface Hardness: Controlled within 58 to 62 HRC for optimal wear resistance and fatigue strength.
- Stress Relieving: Performed prior to finish grinding to eliminate residual machining stresses and prevent distortion.
Manufacturing & Grinding Capabilities
Continuous Generating Grinding: Utilizes multi-thread grinding worms to simultaneously grind multiple tooth flanks, ensuring superior pitch stability and surface finish.
Profile Grinding: Applied for large modules or custom tooth forms, allowing individual correction of pressure angle and tooth thickness.
Datum Reference Machining: All four reference faces are precision milled and ground relative to the pitch line, ensuring parallel alignment and simplified installation.
Accuracy & Quality Inspection
Gear Metrology Inspection: CNC gear inspection centers measure total cumulative pitch error, single pitch deviation, and tooth-to-tooth error.
Metallurgical Analysis: Laboratory testing verifies case hardening depth, micro-structure integrity, and core hardness.
Geometric Verification: Laser interferometers and CMM systems check total length tolerances, straightness, parallelism, and perpendicularity.
Available Sizes & Customization
Standard Catalog Dimensions: Cross-sections ranging from 15x15 mm up to 100x100 mm in standard lengths up to 3000 mm.
Custom OEM Specifications
- Custom Lengths: Specific section lengths cut to eliminate machining gaps in unique machine beds.
- Custom Cross-Sections: Tailored height and width dimensions to match specific machine frame interfaces.
- Specialized Coatings: Black oxide, electroless nickel plating, or chrome plating for specific environmental demands.
- Integration Features: Pre-drilled mounting holes, dowel pin holes, and stepped shoulders based on customer engineering drawings.
Typical Applications
CNC Machine Tools: Gantry milling centers, boring machines, and heavy-duty lathe axis drives requiring high rigidity and sub-micron positioning.
Cutting Systems: High-speed fiber laser cutting tables and plasma profiling machines requiring rapid acceleration and deceleration.
Automation & Robotics: Heavy payload linear transfer units, gantry pick-and-place systems, and rack-and-pinion vertical lifting axes.
Material Handling: Automated storage and retrieval systems, stacker cranes, and heavy industrial transfer carts.
Packaging & Logistics
Corrosion Prevention: Coated with heavy-duty rust-preventative oil and hermetically sealed in anti-corrosion VCI film.
Impact Protection: Secured inside rigid wooden crates or reinforced heavy-walled cardboard tubes with internal blocking to prevent bending or impact damage during transit.
Traceability Labeling: Each batch and individual rack is marked with heat numbers, pitch verification data, and part identification for complete traceability.
Frequently Asked Questions
Q: How do I select between straight and helical ground gear racks?
A: Select straight racks for applications requiring easy alignment, frequent reversing, or zero axial load. Choose helical racks when high-speed operation, quiet running, and higher load transmission capacity are required.
Q: What is the maximum continuous length available without pitch disruption?
A: Standard individual racks are manufactured up to 3000 mm. For longer travels, end-to-end mounting is achieved using a specialized mounting gauge to maintain exact pitch spacing across joints.
Q: How is backlash minimized in rack and pinion drives?
A: Backlash is controlled by selecting precision-ground teeth with tight tolerance classes, utilizing dual-pinion preload systems, or adjusting center distance precisely via adjustable gearbox mountings.
Q: Can custom mounting holes be machined according to my drawings?
A: Yes, custom configurations including specific counterbores, tapped holes, pin locations, and end-machining steps are produced directly from customer CAD files.
Hot Tags: high-precision ground gear rack, China high-precision ground gear rack manufacturers, suppliers, factory, Custom DIN 6 Ground Gear Racks, Custom Straight Tooth Gear Racks, DIN 6 Ground Gear Racks for Robotic Travel Axes, Round Gear Racks for Material Handling Equipment


