Straight Teeth Milled Round Racks DIN10
Straight Teeth Milled Round Racks DIN10 refer to cylindrical racks with straight teeth, manufactured in accordance with Germany's DIN10 standard. They are designed for medium-precision transmission applications, balancing performance and cost-effectiveness.
Product Parameters
|
Quality |
Teeth Treatment |
Gear Standard |
Pressure Angle |
Right Helix Angle |
Material |
Heat Treatment |
|
DIN10e27 |
Milled |
DIN867 |
20° |
0° |
C45 |
Induction-hardened:HRC50-55 |
Characteristics
Straight teeth milled round racks DIN10 have a simple yet functional design tailored for linear transmission, with core structural components including:
- Rack Body: A long, cylindrical or rectangular bar (depending on application) with a flat or rounded profile, serving as the base for tooth machining. Its cross-section (round or rectangular) is determined by mounting requirements and load capacity.
- Straight Teeth: Uniformly spaced, parallel teeth machined along the length of the rack body. The tooth profile follows standard involute geometry, ensuring compatible meshing with mating spur gears. Unlike helical teeth, straight teeth are aligned parallel to the rack's axis, enabling direct, linear power transmission
Advantages
- Versatile Applicability: Stable performance under moderate loads, medium speeds, and non-stringent precision/noise requirements. They offer decent wear resistance, with tooth surface hardness typically reaching HRC50-55.
- Easy Installation: Lower demands on mounting datum accuracy simplify equipment assembly and reduce installation costs.
Application
- General Machinery: Light conveyors, lifting platforms, packaging machines, and simple assembly lines.
- Agricultural & Construction Equipment: Harvesters, small loaders, and warehouse stackers.
- Auxiliary Automation Devices: Material-handling carts and basic robot travel mechanisms with low precision demands.
Company Introduction
One Of The Best Rack and Pinion Manufacturers In China
Kunshan Devotec Automation Co., Ltd. was established in 2012, but its origins trace back to an initial investment by the German company WMH HERION in Qingdao, Shandong Province in 2007. Since then, we have accumulated extensive experience in engineering, manufacturing, and quality control. As a specialist in drive technology, Kunshan Devotec Automation focuses on the production of high-precision gear racks, gears, pinions, gearboxes, linear guideways, and other linear transmission components.

Equipments
Main Production Equipment
The main equipment consisting of rack milling machines and grinding machines are imported from Germany.
The rack milling machine
Backlash-free drives with ball screws and the computer-calculated gearbox achieve the best results in terms of smooth running and gearing quality. The machine can work in synchronous rotation and counter-rotation.

The rack grinding machine
The control of the Rack grinding machine RG 2400 is performed via a Siemens control 840D sl. The CNC control on the RG 2400 can freely control up to 6 axes and the main spindle. The data exchange takes place via an Ethernet interface. Siemens servo drives are used. By swivelling the feed carriage on the pivoting table, it is possible to establish helical gearing of up to 25°in both directions.

Hot Tags: straight teeth milled round racks din10, China straight teeth milled round racks din10 manufacturers, suppliers, factory, round spur gear racks, Straight Teeth Ground Round Racks DIN6, straight teeth round racks, Straight Teeth Milled Round Racks DIN10, gear rack round


