Custom-Size Milled Gear

Custom-Size Milled Gear

Engineered to exact print specifications, our custom-size milled gears deliver reliable torque transmission and rotational accuracy for demanding industrial drive systems, utilizing multi-axis CNC gear milling and hobbing paired with controlled carburizing and precision grinding to ensure long-term operational durability.
Send Inquiry

Product Overview

 

Engineered to exact print specifications, our custom-size milled gears deliver reliable torque transmission and rotational accuracy for demanding industrial drive systems, utilizing multi-axis CNC gear milling and hobbing paired with controlled carburizing and precision grinding to ensure long-term operational durability.Rigid Structural Integrity: Built from high-grade alloy steels subjected to rigorous thermal processing to withstand high cyclic fatigue and impact loads.

 

Key Features and Benefits

 

High Kinematic Accuracy: Tight pitch and profile tolerances minimize transmission error, reducing vibration and noise during high-speed operation.


Optimized Load Distribution: Customized tooth modifications prevent edge loading under heavy operational torque.


Extended Wear Resistance: Deep case-hardening layers combined with tough core structures prevent premature tooth pitting and root bending fatigue.


Interchangeable Integration: Tailored bore configurations, keyways, splines, and mounting faces ensure seamless drop-in replacement or original equipment assembly.

 

Technical Specifications

 

Parameter

Specification Range

Module Range

Metric Module 1.0 – 32 / DP 25 – 1

Maximum Diameter

Up to 1,500 mm outer diameter

Face Width

Up to 350 mm maximum tooth width

Quality Grade

DIN 5 to DIN 9 (AGMA Q10 – Q14 equiv.)

Pressure Angle

Standard 20°, 14.5°, or custom angles

 

Tooth Design and Gear Geometry

01/

Gear Configurations: Spur gears, single/double helical gears, internal gears, and stepped cluster gears.

02/

Flank Modifications: Custom pressure angle relief, lead crowning, and root fillet optimization to absorb misalignment.

03/

Backlash Control: Precision tooth thickness adjustment to achieve specific backlash tolerances for reversing drives.

04/

Helix Angles: Left-hand or right-hand helix angles manufactured up to 45 degrees.

Manufacturing Workflow

 

Blank Preparation: High-precision turning of forged or rolled steel blanks to establish accurate datum surfaces and concentricity.


Multi-Axis Machining: Material removal using multi-axis CNC hobbing and profile milling machines to form accurate tooth spaces.


Inter-Operation Check: In-process coordinate measuring to verify tooth thickness, pitch variation, and runout before thermal processing.


Hard Finishing: Post-heat-treatment precision gear grinding or shaving to eliminate thermal distortion and achieve final surface finish.

 

Materials and Heat Treatment

 

Alloy Selection

20CrMnTi / 16MnCr5 for case-hardened gears.
42CrMo4 / 35CrMo for through-hardened gears.
Stainless steel (AISI 316 / 304) for corrosive environments.

Carburizing & Quenching

Controlled atmosphere heat treatment yielding case depths of 0.5 mm to 2.5 mm.

Hardness Profile

Controlled to 58–62 HRC on tooth flanks; core hardness maintained at 30–45 HRC.

Stress Relieving

Post-machining and post-welding thermal tempering to eliminate residual stresses.

 

Quality Control and Inspection

 

Gear Metrology: Full profile, helix, pitch, and runout evaluation using dedicated CNC gear inspection centers.


Nondestructive Testing: Magnetic particle inspection (MPI) performed on critical batches to detect surface micro-cracks.


Metallurgical Analysis: Microstructure examination, grain size verification, and case depth depth-hardness testing.


Traceability: Full material test reports (MTR) and inspection documentation supplied with production lots.

 

Target Applications

Industrial Gearboxes

Heavy-duty industrial speed reducers and planetary gear drives.

Material Handling

Automated storage systems, gantry cranes, and heavy conveyor drives.

Robotics

High-precision axes in industrial articulated robots and linear transfer systems.

Energy Equipment

Wind turbine yaw/pitch drives and solar tracking gear mechanisms.

Customization Parameters

 

Category

Available Custom Options

Dimensions

Outer Diameter: 50–1,500 mm / Face Width: Up to 350 mm

Bore & Interface

Tolerances: H7, JS7 / Keyways: DIN 6885 / Splines: DIN 5480

Geometry

Custom tooth counts, non-standard modules, and modified helix angles

Surface Finish

Black oxide, phosphating, anti-corrosion plating, or specialized primers

 

Frequently Asked Questions

 

Q: What file formats are required to quote a custom-size milled gear?

A: Submit complete 2D engineering drawings detailing tooth data, tolerances, and material specifications, accompanied by a 3D CAD model for manufacturing validation.

Q: What is the standard lead time for custom gear production?

A: Production lead times typically range from 3 to 6 weeks, depending on raw material availability, geometry complexity, and heat treatment requirements.

Q: How is gear quality verified before shipment?

A: Every production batch undergoes dimensional inspection using coordinate measuring machines, gear profile analysis, and hardness testing, with inspection reports supplied prior to dispatch.

Q: Can gears be manufactured from client-supplied material?

A: Yes, certified material blanks supplied by clients can be machined, provided material test certificates and blank pre-inspection data meet technical requirements.

Hot Tags: custom-size milled gear, China custom-size milled gear manufacturers, suppliers, factory, Custom Helical Pinion Shafts, Custom Rack and Pinion Sets with Special Modules, DIN 6 Ground Helical Gears in 20MnCr5 Steel