Product Overview
Long-length milled gear racks are engineered for high-precision linear drive systems requiring rigid power transmission and continuous stroke accuracy over extended distances. Utilizing high-efficiency milling processes on precision-grade alloy steel blanks, these components deliver consistent tooth geometry, stable pitch accumulation control, and reliable load distribution across heavy-duty axes for automated machinery and multi-axis CNC equipment.
Key Features & Operational Benefits
Continuous Pitch Accuracy: Maintains strict cumulative pitch tolerances across extended travel paths to minimize positioning errors during long-axis synchronous movement.
High Load Transmission Capacity: Optimized tooth root thickness handles heavy cyclic thrust forces while distributing mechanical stress evenly across engaged tooth flanks.
Seamless End-to-End Jointing: Ground and checked end faces permit precise multi-piece alignment, eliminating pitch step errors at section junctions during installation.
Dimensional Stability: Relieved internal stresses prevent thermal and mechanical warping, retaining straightness under continuous high-speed acceleration loads.
Technical Specifications
|
Parameter |
Standard Options / Range |
|
Module Range |
Mod 1.0 to Mod 10.0 metric profiles |
|
Accuracy Grades |
DIN 5, DIN 6, DIN 7, DIN 8, DIN 10 |
|
Single-Piece Lengths |
1000 mm, 2000 mm, 3000 mm |
|
Cross-Section Profiles |
Square, rectangular, custom geometries |
Tooth Geometry & Design
Pressure Angle
Standard 20-degree pressure angle ensures high contact ratio and smooth meshing performance.
Helix Configuration
Straight cut (spur) for simple alignment; helical cut options for higher load capacity and quieter operation.
Profile Modification
Tip and root relief available to absorb engagement shock and reduce operational noise at high velocities.
Material Selection & Heat Treatment
Alloy Selection: C45 medium carbon steel for general-purpose use; 42CrMo4 alloy steel for high-fatigue requirements; stainless steel for corrosion resistance.
Hardening Methods: Induction tooth hardening achieves 50 to 55 HRC surface hardness while maintaining a tough, ductile core.
Through-Hardening: Available for heavy shock load applications requiring uniform core strength.
Manufacturing Workflow
Blank Preparation
Precision sawing and CNC milling establish flat reference mounting faces and square reference edges.
Gear Milling
High-rigidity multi-axis gear milling cutters form accurate tooth profiles in a single setup.
Stress Relieving
Thermal annealing eliminates machining stresses induced during rough and finish cutting operations.
Finish Grinding
Optional tooth flank grinding applied for ultra-high precision accuracy grades.
Quality Inspection & Metrology
Pitch Verification
Laser interferometers and gear measuring centers verify cumulative and single-pitch errors.
Dimensional Checks
Coordinate measuring machines check overall length, thickness, and mounting hole locations.
Hardness Testing
Rockwell hardness testers confirm uniform case depth and tooth surface hardness values.
Straightness Inspection
Dial indicators and optical flat tables measure lateral and vertical camber deviations.
Customization Capabilities
Custom Pitch & Modules
Engineered tooth profiles built to proprietary client drawings or specific load calculations.
Special Machining
Pre-drilled mounting holes, counterbores, dowel pins, and custom step joints tailored to machine beds.
Surface Protective Coatings
Black oxide finish, electroless nickel plating, and anti-corrosion preservation oils applied per operational environment.
Matched Sets
Factory-paired racks and pinions marked for synchronized backlash control on dual-drive axes.
Typical Industrial Applications
CNC Gantry Machines
Provides synchronous long-travel motion for heavy bridge and cross-rail positioning.
Plasma & Laser Cutting Systems
Ensures smooth, high-speed acceleration and deceleration profiles on large cutting tables.
Automated Storage & Retrieval Systems
Drives vertical and horizontal mast lifting mechanisms under heavy payload conditions.
Industrial Robotics
Acts as linear transfer tracks for floor-mounted robot transport units.
Frequently Asked Questions
Q: How is joint alignment managed for installations exceeding standard lengths?
A: Racks feature precision-machined end faces paired with dedicated mounting alignment gauges or pin connections to maintain exact pitch continuity between consecutive segments.
Q: What is the standard tolerance for cumulative pitch error?
A: Cumulative pitch error varies by DIN accuracy grade, typically controlled within 0.022 mm to 0.085 mm per 1000mm length depending on the specified grade.
Q: Can tooth surface hardness be customized for specific load profiles?
A: Yes, induction hardening depth and hardness values are adjustable based on mating pinion hardness and expected service lifespan.
Q: What anti-corrosion treatments are available for humid environments?
A: Options include stainless steel material selection, chemical blackening, and specialized industrial coatings suited for cleanroom or outdoor operational environments.
Hot Tags: long-length milled gear rack, China long-length milled gear rack manufacturers, suppliers, factory, Custom Gear Racks with Special Helix Angles, Custom Precision Cylindrical Gears, DIN 6 Ground Gear Racks with Matched Spur Pinions, DIN 6 Ground Steel Gear Racks Module 4, Induction Hardened Helical Gear Racks Module 2


