Product Overview
A hardened milled gear rack is a precision linear drive component engineered to transmit high torques and sustain heavy axial loads in synchronized motion systems. Fabricated through high-precision milling and selective induction tooth hardening, it delivers exceptional wear resistance, smooth mesh engagement, and minimal pitch accumulation over extended travel lengths, serving as the mechanical backbone for demanding automation equipment.
Key Features and Benefits
Optimized Tooth Hardness: Induction-hardened tooth profiles achieve 50 to 58 HRC while maintaining a resilient, ductile core to absorb dynamic shock loads.
Controlled Pitch Accuracy: Milled tooth geometry restricts cumulative pitch errors down to 0.022 mm per 300 mm, ensuring synchronized multi-axis movement.
High Load Transmission: Thickened tooth roots and wide face widths distribute contact stresses evenly, preventing premature tooth shearing under rapid acceleration.
Extended Operational Life: Hardened wear surfaces resist abrasive particle ingress and mechanical fatigue, significantly lowering maintenance intervals.
Technical Specifications
|
Parameter |
Specification Range |
|
Module Range |
Metric m1 to m25 (Diametral Pitch available) |
|
Accuracy Grades |
DIN 5, DIN 6, DIN 7, DIN 8, DIN 9 |
|
Standard Lengths |
1000 mm, 2000 mm, 3000 mm (Custom matching) |
|
Cross-Sections |
Square, rectangular, custom geometry profiles |
|
Pressure Angle |
Standard 20 degrees (Custom angles available) |
Tooth Design and Profile
Tooth Geometry: Straight and helical configurations; helical designs provide higher contact ratios and quieter operation.
Profile Modifications: Profile relief and lead crowning options minimize edge loading and reduce engagement shock at high speeds.
Surface Finish: Precision-ground or fine-milled tooth flanks lower friction coefficients and reduce backlash during directional reversals.
Material and Heat Treatment
Alloy Steels: High-grade structural steels including 40Cr, C45, 34CrNiMo6, and case-hardening steel 18CrMnTi.
Hardening Depth: Controlled induction hardening layer spanning 1.5 mm to 3.5 mm following the tooth contour.
Core Strength: Maintained between 800 MPa and 1100 MPa to prevent bending fatigue and structural cracking.
Manufacturing Process
Blank Preparation: Precision sawing, normalizing, and face turning to establish strict dimensional baselines.
Gear Milling: High-speed CNC hobbing and rack milling utilizing specialized form cutters for exact pitch and profile geometry.
Thermal Processing: Controlled-atmosphere induction hardening followed by stress-relieving tempering to minimize distortion.
Post-Heat Finishing: Hydraulic straightening and finish machining of mounting reference surfaces to eliminate thermal bow.
Quality Control and Inspection
Pitch Verification: Automated coordinate measuring machines and laser pitch checkers measure individual and cumulative deviations.
Hardness Testing: Rockwell hardness testers verify surface layer hardness across tooth flanks and core sections.
Dimensional Control: Dial indicators and optical comparators inspect parallelism, straightness, and mounting hole tolerances.
Lot Traceability: Complete material test reports and inspection sheets supplied with every production lot.
Customization Services
Dimensional Tailoring: Custom cross-sections, mounting hole patterns, counterbores, and tapped holes configured to machine beds.
End Machining: Step joints, interlocking half-lap ends, or continuous ground ends for seamless multi-rack alignment.
Surface Treatments: Black oxide, electroless nickel plating, or anti-corrosion preservation oils for specialized environments.
Engineering Support: Custom prototype review and sample manufacturing based on client-provided CAD models and load calculations.
Typical Applications
CNC Machine Tools: Gantry milling centers, boring machines, and heavy-duty lathe axis drives requiring rigid linear positioning.
Automated Cutting Systems: Plasma, laser, and waterjet cutting tables needing high traverse speeds and low vibration.
Material Handling: Automated storage and retrieval systems, palletizers, and heavy industrial transfer gantry lines.
Industrial Robotics: Linear slide axes and multi-axis gantry robots handling heavy payloads over long operational spans.
Frequently Asked Questions
Q: What is the maximum single-piece length available without joint alignment?
A: Standard single-piece manufacturing lengths extend up to 3000 mm. Longer axes utilize precision-machined end-to-end matching joints aligned with dowel pins or mounting gauges.
Q: How do I choose between straight and helical tooth racks?
A: Straight teeth suit general positioning and simplified mounting setups. Helical teeth provide smoother engagement, higher load capacity, and quieter performance at high speeds due to continuous tooth overlap.
Q: What mounting tolerance is recommended for optimal performance?
A: Mounting parallel to linear guide rails requires alignment within plus or minus 0.02 mm. Proper backlash must be maintained using a feeler gauge or dial indicator between the rack pitch line and the mating pinion.
Q: Can these racks be modified after heat treatment?
A: Tooth flanks and hardened outer layers cannot be easily modified after induction hardening. All custom mounting holes, cut-to-length dimensions, and end features must be completed prior to heat treatment.
Hot Tags: hardened milled gear rack, China hardened milled gear rack manufacturers, suppliers, factory, Custom Gear Racks with Special Helix Angles, Custom Precision Cylindrical Gears, DIN 6 Ground Gear Racks with Matched Spur Pinions, DIN 6 Ground Steel Gear Racks Module 4, Induction Hardened Helical Gear Racks Module 2


