Custom-Length Gear Rack

Custom-Length Gear Rack

Custom-length gear racks are precision linear transmission components engineered to convert rotational motion into linear motion across heavy-duty industrial machinery.
Send Inquiry

Product Overview

 

Custom-length gear racks are precision linear transmission components engineered to convert rotational motion into linear motion across heavy-duty industrial machinery. Manufactured to exact machine frame dimensions, these racks eliminate standard stock length limits and support multi-segment splicing with zero cumulative pitch deviation over extended axes. They serve as primary drive elements in CNC gantry systems, heavy load automation lines, and precision positioning stages requiring exact linear travel.

 

Customization Options

Dimensional Parameters

Module Range: M1.0 to M12.0
Single-Piece Length: Up to 3000 mm; precision-machined ends allow infinite modular splicing.
Cross-Sectional Profiles: Rectangular, square, and circular configurations.

Tooth Configurations

Profile Types: Straight teeth (spur) and helical teeth (helix angles from 19°52').
Pressure Angles: Standard 20° (custom angles available upon review).

Machining Features

Mounting Interfaces: Pre-drilled counterbored holes, tapped blind holes, dowel locating holes, or stepped edges per CAD drawings.
End Machining: Step-joint or half-tooth matching ends for continuous pitch alignment.

 

Key Features and Benefits

 

Extended Axis Continuity: Precision-ground mating ends allow continuous joining without pitch loss or backlash accumulation.


High Load Capacity: Robust core strength combined with hard tooth flanks withstands severe shock loads and high acceleration rates.


Geometric Stability: Post-machining stress relief prevents thermal warping, maintaining straightness throughout long operational cycles.


Optimized Meshing: Controlled tooth thickness and fine flank surface finishes minimize friction, vibration, and noise during high-speed travel.

 

Technical Specifications

 

Parameter

Specification Range

Precision Grades

DIN 5, DIN 6, DIN 7, DIN 8, DIN 10

Cumulative Pitch Error (Fp)

≤ 0.022mm per 1000 mm (DIN 5 ground)

Tooth Surface Hardness

58–62 HRC (Case Hardened) / 50–55 HRC (Induction Hardened)

Straightness Tolerance

≤ 0.15mm per 1000 mm

Surface Roughness (Ra)

0.4um to 0.8um

 

Materials and Heat Treatment

 

Material Selection

  • C45 / 1045: Cost-effective carbon steel for general industrial positioning.
  • 16MnCr5 / 20CrMnTi: Alloy steels for high-load, heavy-duty machinery.
  • Stainless Steel (AISI 304 / 316): Corrosion-resistant options for chemical or cleanroom environments.


Heat Treatment Processes

  • Induction Hardening: Surface heating and rapid quenching to harden tooth flanks while maintaining core ductility.
  • Carburizing and Quenching: Carbon diffusion followed by thermal treatment to achieve deep wear resistance.
  • Stress Relieving: Intermediate thermal cycles before finish grinding to eliminate residual stresses.

 

Manufacturing and Quality Control

 

Machining Equipment
High-precision CNC rack milling machines, gear hobbing machines, and continuous form gear grinders.


Inspection Protocols

  • Gear Measuring Centers: Automated verification of pitch error, helix angle, and tooth profile.
  • CMM Systems: Dimensional checks for overall length, hole locations, and geometric tolerances.
  • Hardness & Roughness Testers: Rockwell/Vickers hardness testing and flank roughness verification.

 

Design and Compatibility Requirements

 

Pinion Matching: Must pair with pinions of matching module, helix angle, and pressure angle; ground racks require ground pinions.


Lubrication: Automated oil or grease lubrication systems are required to maintain continuous film under high sliding speeds.


Mounting Preparation: Machine bed mounting planes must be precision-machined flat within ≤ 0.03mm parallelism.

 

Applications

01/

CNC Gantry Equipment: Long-axis drives for plasma, laser, and waterjet cutting tables.

02/

Heavy Industrial Automation: High-load transfer lines, gantry robots, and automated storage systems (AS/RS).

03/

Material Handling: Linear transfer axes for heavy gantry cranes and AGV docking stations.

04/

Specialized Machinery: High-precision lifting columns and stage mechanics.

Custom Manufacturing Process

 

Engineering Review: Technical evaluation of 2D/3D customer drawings (STEP, IGES, PDF) regarding loads and speeds.


Blank Preparation: Sawing or forging raw alloy steel bars to rough dimensions with machining allowances.


Rough Machining & Stress Relief: Milling reference faces and executing thermal stress-relieving cycles.


Tooth Cutting: Hobbing or milling teeth to pre-finish dimensions.


Heat Treatment: Induction hardening or carburizing to achieve specified surface hardness.


Finish Grinding & Boring: CNC precision grinding of tooth flanks and machining mounting holes to final tolerances.


Final Inspection & Packaging: Metrology checks, anti-corrosion oil application, and secure wooden crate packaging.

 

Frequently Asked Questions

 

Q: How are custom-length racks joined for axes exceeding single-piece limits?

A: Racks are supplied with matched step-joint or half-tooth ends. Installers use module-matched alignment gauge blocks to bridge adjacent segments, ensuring continuous pitch without spacing errors.

Q: What file formats are required for a custom quotation?

A: 2D PDF manufacturing drawings detailing tolerances, hole patterns, and finishes, accompanied by 3D models (STEP/IGES) and operating parameters (load, acceleration, duty cycle).

Q: Is post-machining drilling possible after heat treatment?

A: Standard mounting holes are machined prior to hardening. Any post-hardening modifications require specialized electrical discharge machining (EDM).

Q: How is straightness maintained after induction hardening?

A: Hydraulic straightening presses combined with secondary stress-relieving treatments ensure straightness tolerances meet engineering limits.

Hot Tags: custom-length gear rack, China custom-length gear rack manufacturers, suppliers, factory, DIN 5 Ground Gear Racks for Servo Positioning Systems, DIN 6 Ground Gear Racks for Linear Drive Assemblies, Induction Hardened Gear Racks for High Wear Applications, Milled Gear Racks for Linear Guide Mounting, Precision Ground Gear Racks with 1 500 mm Length